Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox HVAC in Austin, TX | Halden Heating and Air Austin
We’re Halden Heating and Air Austin, an independent Lennox service provider serving the whole city. We repair, maintain, and install Lennox equipment in Austin homes, and the thing that sets our work apart is simple: we know how Austin’s climate and housing stock beat up Lennox systems specifically. Call (361) 202-9170 and we’ll put a price in writing before we touch a thing.
We see the full spectrum of Lennox equipment in Austin: 1990s Merit-series condensers on original cinder-block homes, current EL/SL series communicating systems in new builds, and everything between. Our techs work on all of it without factory ties, which means we’re free to tell you the truth about what’s worth fixing and what isn’t.
Why Austin Residents Choose Us for Lennox Service
Lennox builds some of the most efficient heat pumps and AC units on the market, but efficiency only pays off if the equipment is matched to the house and the climate. Austin’s combination of 100-degree afternoons, cedar pollen, hard water, and older ductwork means a Lennox system here faces conditions a unit in Dallas or Houston doesn’t. We account for that on every call.
Andre Fuller leads our team. He grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending decades turning wrenches on rooftop package units and high-efficiency heat pumps. Since bringing that experience to Austin, he’s built a crew that knows Lennox equipment inside and out. When we quote a repair, we know the part, the labor time, and what the Austin heat has likely done to the unit before we even open the panel.
Our Lennox sales & service team covers the full range of this equipment, and our familiarity with Austin’s specific conditions means faster diagnoses and fewer return trips. Every job includes a written price before work starts and a written guarantee on every repair. If a repair fails within the coverage window, we come back at no charge. That’s not an add-on. It’s how we’ve worked since 2004.
Styles & brands we work with
Common Lennox HVAC Problems We Solve in Austin
Lennox equipment is well built, but Austin’s climate finds the weak points. These are the calls we run most often:
- Failed ECM blower motors in XC and EL series air handlers. Austin attics routinely hit 140 degrees in summer. That prolonged heat soak shortens the life of ECM blower modules in Lennox air handlers. We typically see failures at the 5 to 7 year mark in second-story installations. We replace with OEM Lennox motors to preserve the system’s airflow programming.
- Stuck reversing valves on XP13 and XP14 heat pumps. Austin’s spring and fall bring 30-degree temperature swings within a single day. Heat pumps switch between heating and cooling more often here than in steadier climates, and older XP series reversing valves eventually stick. A stuck valve means cool air in December or heat in July.
- Leaking evaporator coils on ML14 and ML17 condensers. Austin’s hard water creates aggressive condensate, and many 1970s to 1990s homes still have flex duct systems in hot attics that shed dust into the coil. The combination accelerates coil corrosion. We find leaks in ML series coils more often in Austin than in softer-water cities.
- Control board errors on iComfort thermostats after power surges. Austin’s summer peak demand causes rolling brownouts and surges. Lennox iComfort thermostats are sensitive to voltage drops, and we regularly replace or reset boards after these events. Adding a surge protector at the disconnect is a cheap safeguard.
- Cedar pollen and cottonwood clogging condenser coils. Austin’s allergy seasons are notorious. Lennox condensers with dense SL series coil fins collect cedar pollen and cottonwood fibers faster than in most cities. A clogged coil raises head pressure and shortens compressor life. We see this on almost every tune-up from January through April.
Lennox Service in Austin: What Local Conditions Mean for Your Equipment
One Austin-specific challenge doesn’t get enough attention: the city’s code-enforced switch from gas furnaces to electric heat pumps. In east Austin’s 1920s bungalows and across neighborhoods like Cherrywood and Blackland, many original Lennox G26 and G32 gas furnaces are now stranded. Homeowners moving to hybrid heat pump retrofits face oddly creative flue and condensate reroutes because those old furnace closets were never designed for heat pump air handlers with drain lines. We’ve run condensate pumps through crawl spaces, rerouted flues through exterior walls, and built custom transition plenums to make the retrofit work without sacrificing efficiency. If you own a pre-1960s Austin home with an old Lennox gas furnace, you need a tech who has done this before. We have.
One example from the field: our tech pulled a 2014 Lennox XP17 heat pump compressor apart in a Hyde Park bungalow after the homeowner heard a loud clunk during the first October cold snap. The reversing valve had snapped its pilot tube, leaving the system stuck in cooling with 40-degree nighttime lows. We replaced the valve, recharged with R-410A to spec, and added a hard-start kit for the next brownout. That’s the level of familiarity we bring to every Lennox call in Austin.
Lennox Models & Products We Service in Austin
We work on all major Lennox lines:
- Merit Series (ML14, ML17): entry-level to mid-range AC condensers and heat pumps
- Elite Series (EL18, EL296): mid-range to high-efficiency systems, many with two-stage operation
- Dave Lennox Signature Collection (SL28XCV, SLP99V): variable-capacity flagship equipment with iComfort communicating controls
- Lennox Healthy Climate (HC16, HC13): media filtration and air quality products
For communicating and variable-speed models, we install OEM Lennox parts to preserve iComfort compatibility. For out-of-warranty Merit systems, we use proven aftermarket capacitors, contactors, and generic ECM modules when replacement cost outweighs the repair value. We’ll tell you which approach makes sense before we order anything.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Austin
Here’s what Lennox service realistically costs in Austin right now. These are the ranges we quote, not national averages:
| Service | Typical Price Range |
|---|---|
| Heat Pump Repair (reversing valve) | $350 – $900 |
| AC Repair (capacitor/contactor) | $150 – $650 |
| Furnace Repair (ignitor/gas valve) | $150 – $700 |
| AC Installation (Lennox Merit 14 SEER) | $3500 – $7500 |
| Tune-Up (heat pump or furnace) | $80 – $200 |
| Mini Split Install (single-zone) | $2500 – $6000 |
The final number depends on your specific Lennox model, the part needed, and how hard access is. A capacitor swap on a ground-level Merit condenser runs toward the low end. A reversing valve on a Signature Collection heat pump in a tight attic closet runs toward the top. Every estimate includes the written price before work starts. Call (361) 202-9170 and we’ll give you exact numbers for your system.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Lennox HVAC in Austin
The most common cause is the thermostat’s radio overheating during attic heat soaks and disconnecting from your home network. Austin’s 100-plus degree afternoons push attic temperatures well past the S30’s comfort range, and the Wi-Fi chip drops out. We fix this by relocating the thermostat away from a hot wall cavity, checking voltage at the control board, and sometimes adding a small heat shield. If it’s a board problem, we replace it with an OEM Lennox part. Call (361) 202-9170 for a diagnosis.
No, and we’d tell you why. The XC21 and SL28XCV use different refrigerant flow rates and coil sizes. Mixing them would kill the efficiency rating you’re paying for and void the new unit’s warranty. You’d need the matching SL series evaporator coil. In some Austin homes with good ductwork, that’s a one-day swap. We’ll quote the full scope in writing before you commit.
That’s classic thermal overload on a weak capacitor or a compressor nearing end of life. When Austin hits 105, your ML17 runs continuously, and the electrical draw spikes. A failing capacitor can’t hold the necessary charge, so the breaker trips. We test the capacitor under load, check the compressor’s amp draw, and replace what’s actually failed. Call (361) 202-9170 for a same-day diagnostic.
Yes, especially after the 2021 freeze. Austin’s winter freezes can sit in the 20s for days, and if your heat pump sits idle through that, refrigerant migrates to the compressor and thins the oil. A crankcase heater keeps the oil warm enough to prevent slugging on startup. Most Lennox heat pumps designed for northern climates include one, but Austin-installed units sometimes get the southern spec without it. We add them on any heat pump that lacks one.
Yes, provided there’s clearance in the return plenum to mount it. Allandale homes from the 1950s often have tight mechanical closets, and we may need to build a transition or move the return drop. The PureAir S filters and purifies in one cabinet, which helps a lot with cedar pollen. We’ll measure static pressure before and after to make sure your old Merit blower can still move enough air. Call (361) 202-9170 for an assessment.
Service Areas Near Austin
We serve the full Austin service area plus nearby communities including Jollyville, Lockhart, and Elgin. Our Lennox service in Georgetown and Lennox service in Kyle covers the north and south corridors. Same scheduling, same written-price guarantee.
Book Your Lennox Service in Austin Today
Need a Lennox repair, tune-up, or replacement quote in Austin? Call (361) 202-9170. A live person answers 24/7. We’ll schedule a tech with a live arrival time you can track, and the price goes in writing before any work starts. Written by Andre Fuller, Owner at Halden Heating and Air Austin, serving Austin since 2004.