Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Austin Homeowners
When your furnace quits on a 35-degree January night in Austin, you don’t need a four-hour window. You need someone who picks up the phone, tells you what’s wrong, and fixes it. Halden Heating & Air has done exactly that for Austin homeowners with our Furnace Repair in Austin since 2004. We’re the HVAC company that gives you a written price before any work starts, sends a background-checked technician with a live arrival time you can track to your door, and backs every repair with a 365-Day Done Right Promise. If it’s not done right, we make it right. No arguing, no runaround. Call (361) 202-9170 and a real person answers, 24/7.
Led by Andre Fuller, our Austin furnace repair team handles everything from a dead ignitor to a cracked heat exchanger. And unlike a standard HVAC call where you wait around guessing when the tech will show, Halden runs on The Relay Standard: book online, get a live arrival time, and track your tech to the door like you’d track a rideshare. The Relay Visibility Guarantee means before-and-after photos, a documented diagnostic, and no price surprises at the doorstep. Ever.
How Much Does Furnace Repair Cost in Austin?
A typical furnace repair in Austin runs between $150 and $700, depending on the part that failed and how accessible your unit is. Here’s a realistic breakdown of what Austin homeowners actually pay:
- Ignitor replacement: $150 – $250. The ignitor (the small ceramic piece that glows to light the gas) is one of the most common parts to fail on Austin furnaces, especially after a summer of sitting unused.
- Flame sensor cleaning or replacement: $120 – $220. A dirty flame sensor (the metal rod that confirms the gas actually lit) causes short cycling and is a quick fix, though a replacement part bumps the price up.
- Pressure switch replacement: $200 – $350. This small diaphragm switch verifies proper venting, and when it fails, your furnace won’t start at all.
- Blower motor replacement: $350 – $650. The blower motor pushes warm air through your ducts. This is one of the pricier single-part repairs.
- Gas valve replacement: $250 – $500. The gas valve controls fuel flow into the burners. We only use manufacturer-spec parts here, no aftermarket substitutes.
What moves the price? The biggest factor is the part itself. After that, it’s accessibility. A furnace stuffed into a tight attic in a Wells Branch townhome takes longer to work on than a basement unit (rare in Austin, but they exist in a few older homes east of I-35). That’s why Halden gives you a written price before we start, not after we’re already in your attic. No hourly billing games, no “surprise, this is more than we said.” You approve the number first, and that’s the number you pay.
The fastest way to avoid overpaying in Austin is to get a diagnostic that tells you exactly what part failed, why it failed, and what it costs to fix. That’s our standard process. Every free estimate includes a full diagnostic of your system’s safety and performance. Call (361) 202-9170 for a no-obligation quote.
Styles & brands we work with
Furnace Maintenance
Furnace Maintenance is the scheduled service that keeps your heating system running safely and efficiently through Austin’s colder months, and it costs between $80 and $200 for a full tune-up. Most Austin homeowners schedule it once a year in the fall, before the first real cold snap hits. At Halden Heating & Air, we check every safety switch, test the burners, measure gas pressure, inspect the heat exchanger for cracks, and clean the flame sensor so your furnace doesn’t quit on the first 40-degree night.
System Safety Inspection
Every furnace maintenance visit starts with a full safety check. We test the carbon monoxide output, inspect the heat exchanger for cracks, and verify the gas line for leaks. In Austin’s older homes around Hyde Park and Clarksville, we regularly find furnaces that were installed before modern CO safety standards, and this check is what catches problems before they become dangerous.
Efficiency Tune
A furnace that’s running dirty burns more gas to produce the same amount of heat. We clean the burners, check the blower motor amperage, and calibrate the gas pressure so your unit runs at its rated efficiency. The $80 – $200 you spend on a tune-up typically pays for itself over one Austin heating season in lower gas bills.
Heat Pump Repair
Heat Pump Repair covers the systems that both heat and cool your home by moving heat rather than creating it, and in Austin, where heat pumps handle year-round comfort, repairs typically run $150 to $700 depending on the component. Heat pumps are common across Austin because they’re efficient in our climate, but they work twice as hard as a furnace-only system, so parts wear faster. Halden Heating & Air Austin diagnoses and repairs all major heat pump brands, including Daikin and Bryant.
Reversing Valve Failure
The reversing valve switches your heat pump between heating and cooling modes. When it sticks, your system blows cold air in heating mode or won’t switch at all. We run a full diagnostic on the valve and the solenoid that controls it before recommending a repair or replacement.
Defrost Board and Sensor Issues
On cold, damp Austin nights, frost builds on your outdoor heat pump coil. The defrost board (the control that runs the defrost cycle) and the temperature sensors that trigger it are common failure points. We stock replacement boards for major brands and usually complete this repair same-day.
Heating Repair
Heating Repair is the broad category for any fix to the system that keeps your home warm, whether that’s a furnace, heat pump, or ductless unit, and Austin homeowners generally pay $150 to $700 for most common repairs. When your heating fails, the cause can range from a tripped circuit breaker to a failed control board. Halden Heating & Air approaches every heating repair with the same written-price process: we diagnose first, quote second, and nothing gets touched until you approve the number.
Thermostat and Control Wiring
Sometimes the furnace is fine and the thermostat is the problem. We test the low-voltage wiring, check for shorted conductors, and verify the thermostat is actually telling your system to run. Modern smart thermostats can also cause issues if the common wire (the power wire that keeps the thermostat charged) isn’t connected properly.
Limit Switch and Safety Control Repair
The limit switch shuts the furnace off if it overheats. In Austin homes with undersized ductwork, especially around Round Rock and Furnace Repair in Pflugerville subdivisions where builders cut corners, a tripping limit switch is a common call. We test the switch, measure temperature rise across the heat exchanger, and fix the root cause, not just the symptom.
Boiler Repair
Boiler Repair in Austin is for hydronic heating systems that heat water and circulate it through radiators or in-floor tubing, with typical repairs ranging from $150 to $700 depending on the failed component. Boilers are less common in Austin than furnaces, but they show up in older neighborhoods like Tarrytown, Rosedale, and a handful of custom homes in West Lake Hills. Halden Heating & Air services boiler systems with the same written-price guarantee as every other repair.
Circulator Pump Replacement
The circulator pump moves heated water from the boiler to your radiators or in-floor loops. When it fails, you’ll get a boiler that runs but radiators that stay cold. We test pump amperage, check the coupling, and replace failed pumps with OEM-spec parts.
Expansion Tank and Pressure Relief
Water expands when it heats, and the expansion tank absorbs that pressure. A failed expansion tank causes pressure relief valve discharge and inconsistent heat. We check tank pressure, test the relief valve, and service the fill valve to keep your system running at the correct operating pressure.
Gas Furnace Repair
Gas Furnace Repair covers the most common heating system type in Austin homes, with typical repair costs of $150 to $700 based on the part and the age of your unit. A gas furnace burns natural gas in a sealed burner assembly, and when components like the ignitor, flame sensor, gas valve, or pressure switch fail, the system either won’t start or won’t stay running. Halden Heating & Air Austin repairs gas furnaces from every major brand, including York and American Standard.
Ignitor and Flame Sensor Service
These two parts account for more Austin gas furnace repair calls than anything else. The ignitor glows to light the gas, and the flame sensor confirms the burn actually happened. If the ignitor is cracked, your furnace won’t light. If the flame sensor is coated with carbon, the furnace lights and then shuts off seconds later. Both are usually same-day fixes.
Gas Valve and Manifold Pressure
The gas valve regulates how much fuel reaches your burners. When it fails, you’ll smell gas but get no heat, or the burners will light weakly and produce a lazy, yellow flame. Because this involves natural gas, we always recommend a trained professional handle any gas valve work. Our techs test inlet and outlet pressure and verify proper combustion before leaving any gas furnace repair job.
Furnace Tune Up
A Furnace Tune Up is a preventive service that runs $80 to $200 and is the single best way to avoid a no-heat call in the middle of an Austin cold snap. We recommend it annually, ideally in September or October before the first overnight freeze. At Halden Heating & Air, a tune-up includes cleaning the burners, checking the heat exchanger, testing the safety controls, and measuring the gas pressure to verify your furnace is firing at spec.
Combustion Analysis
We don’t guess at efficiency. Using a combustion analyzer (a tool that measures the gases your furnace exhausts), we verify your unit is burning fuel cleanly and completely. High carbon monoxide readings or excess oxygen point to specific problems we can fix before they become failures or safety risks.
Air Flow and Static Pressure Check
A furnace with poor airflow overheats, runs inefficiently, and fails early. We measure static pressure across your system and check the blower wheel and filter situation. Many Austin furnaces we tune up are running with a dirty blower wheel that cuts airflow by 20% or more, and cleaning it often drops the system’s energy use immediately.
Emergency Furnace Repair
Emergency Furnace Repair is available 24/7 from Halden Heating & Air, with most emergency repairs falling in the $150 to $700 range depending on the component that failed. When your furnace dies at 2 a.m. during an Austin freeze warning, our phones are answered by a real person, not a voicemail tree. You’ll get a live arrival time, and your background-checked tech shows up when we say they will, no four-hour window.
Overnight and Weekend Response
We dispatch techs across Austin and the surrounding areas at all hours. Cold-weather nights put real stress on older furnaces, and components that were barely hanging on all fall tend to fail on the first genuinely cold night. You’ll get the same written price before any work starts, even at 2 a.m.
Same-Day Part Sourcing
In an emergency, the last thing you want to hear is “we’ll have to order that part.” We keep common furnace parts on our service vehicles, and our supply chain across the Relay Home Co. network means we can source uncommon parts from local Austin distributors same-day in most cases. Call (361) 202-9170 and we’ll get someone moving.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service York furnaces and heat pumps regularly across Austin, including the Affinity and LX series. Our techs are trained on York’s specific control boards and ignition systems, and we keep common York replacement parts stocked on our trucks. A York furnace with a failed pressure switch or ignitor is a standard same-day repair for us.
Daikin is another brand we see constantly in Austin, especially with our Furnace Repair in Buda and newer construction around Kyle. Daikin’s variable-speed systems require specific diagnostic procedures, and our techs have the training and tools to work on their inverter-driven compressors and communicating control systems. Whether you have a Daikin, York, Bryant, American Standard, or any other make, we can help.
Signs You Need a Pro Right Now
- Your furnace is blowing cold air. The burners may not be lighting, the flame sensor might be dirty, or the gas valve could have failed. Running the system in this state wastes energy and you’re still cold. This is a repair we handle same-day across Austin.
- You smell gas or a burning odor. A gas smell could mean a leak at the valve or supply line, and a burning smell often means dust burning off the heat exchanger or, worse, an overheating motor. If you smell gas, leave the house and call us from outside. This is an emergency call.
- The furnace short cycles. If it turns on for a few minutes, shuts off, and repeats, the system is hitting a safety limit or the flame sensor is failing. Short cycling doubles the wear on every component and drives your energy bill up. We can diagnose the exact cause in a single visit.
- Strange noises from the unit. Squealing usually means a failing blower motor bearing. Banging or popping suggests the ductwork is expanding or the burners are delayed on ignition. Both are repairable, and ignoring them turns a $200 fix into a $600 motor replacement.
- Carbon monoxide detector alarm. If your CO detector goes off, ventilate the space and get outside. A cracked heat exchanger can leak CO into your home’s air, and this is the most serious furnace issue there is. We’ll test the heat exchanger with a combustion analyzer and give you a straight answer.
Our Process, Step by Step
- 1
Book online or call. You schedule through our website or by calling (361) 202-9170. A live person answers, takes your information, and schedules a time that works for you. You’ll get a confirmation with your tech’s name and a live arrival time.
- 2
Track your tech to the door. Your background-checked, uniformed Halden technician arrives with a live arrival time you can track from your phone. No four-hour windows, no waiting around guessing. The Relay Visibility Guarantee means you see who’s coming and when, down to the minute.
- 3
Diagnostic and written quote. The tech runs a full diagnostic on your furnace, using a multimeter to test electrical components, a combustion analyzer to check burn quality, and a visual inspection of the heat exchanger, burners, and venting. Then you get a written price before any work starts. You approve the number or we pack up and leave. No pressure.
- 4
The repair. Once you approve the written price, the tech completes the repair using manufacturer-spec parts. Before-and-after photos document the work. Every repair includes a written guarantee, and a free second visit if the repair fails. That’s not an add-on, it’s the Halden standard.
- 5
365-Day Done Right Promise. For a full year after any completed job, if something isn’t right, we make it right. Every job ends with the same promise: a working system, a written guarantee, and no loose ends.
Our Service Area Near Austin
Halden Heating & Air serves Austin and the surrounding communities including Georgetown, Kyle, Jollyville, Lockhart, Elgin, Hornsby Bend, Manor, Lost Creek, Shady Hollow, Wells Branch, and Buda. Most furnace repair calls in Austin proper get same-day service, and we dispatch techs across the metro daily. If you’re in the Austin city limits, expect a tech at your door within hours, not days. For neighbors in Georgetown, see our Furnace Repair in Georgetown page. Likewise, homeowners in Kyle can check out Furnace Repair in Kyle.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Austin
Furnace repair is the diagnosis and correction of any problem preventing your heating system from producing or distributing warm air. Common Austin furnace repairs include ignitor replacement, flame sensor cleaning, gas valve service, blower motor replacement, and pressure switch repair. Most furnace repairs in Austin cost between $150 and $700, and Halden Heating & Air completes the majority same-day. Call (361) 202-9170 for a diagnostic and written quote.
Most furnace repairs take between 45 minutes and two hours once the technician has diagnosed the problem. Common parts like ignitors, flame sensors, and pressure switches are usually done in under an hour since we stock them on our trucks. More involved repairs like a blower motor or gas valve replacement can run two to three hours. We’ll give you a time estimate before the work starts, along with your written price.
Most Austin furnace repairs run between $150 and $700 depending on the part. A flame sensor replacement typically costs $120 to $220, an ignitor runs $150 to $250, and a blower motor can reach $350 to $650. Halden gives you a written price before any work starts, so the number you approve is the number you pay. Call (361) 202-9170 for a free estimate.
Yes, we service York furnaces, including the LX and Affinity series, and we stock common York replacement parts on our trucks. We also service Daikin, Bryant, American Standard, Carrier, Trane, Lennox, Goodman, and Rheem. Our techs are trained on York’s control boards and ignition systems, so a York furnace repair is typically a same-day job for us.
Yes, Halden Heating & Air offers 24/7 emergency furnace repair across Austin. Our phones are answered by a real person around the clock, and we dispatch techs on nights and weekends. Same-day and overnight service is available for no-heat situations, and emergency calls get the same written-price-before-work guarantee as every other job. Call (361) 202-9170 any time.
Every Halden furnace repair comes with a written guarantee, not an oral promise. If the repair fails within the coverage window, we come back at no charge, automatically. That’s the 365-Day Done Right Promise: a full year of accountability on every completed job. The free second visit is included, not an add-on.
Clear a path to the furnace and make sure the area around the unit is accessible, especially if it’s in an attic or closet. If you have pets, secure them during the visit. Have your thermostat set to a comfortable baseline and note any error codes or unusual sounds you’ve noticed. That’s all you need to do; our tech handles the rest, including the diagnostic and written quote.
Schedule Your Furnace Repair Service in Austin Today
Your furnace should work when it’s cold, and Halden Heating & Air makes sure it does. Call (361) 202-9170 now for a free, no-obligation estimate. A live person answers 24/7, and you’ll get a written price before any work starts, a live arrival time, and a year of accountability on every job. Or head back to our home page to book online.
Written by Andre Fuller, Owner at Halden Heating and Air Austin, serving Austin since 2004.