Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Manor
AC installation in Manor, TX typically runs $3,500 to $7,500 for a full system replacement, and most jobs are completed in a single day. That’s the real number we put in writing before a single tool comes off the truck. If you’re dealing with a failed unit in Presidential Meadows or a new build off Highway 290 that needs proper sizing, call us at (361) 202-9170 and we’ll schedule a free estimate with a live arrival time you can track to your door.
Manor’s housing stock presents a specific set of challenges that most HVAC companies don’t address. We do. The production-built subdivisions here repeat the same floor plans and the same HVAC designs block after block, which means we already know what’s failing before we even pull up. That local knowledge saves you time, money, and a lot of hot afternoons.
Why Halden Heating and Air Austin Is Manor’s Preferred AC Installation Company
Andre Fuller leads our Austin-based team, and we’ve built our reputation in Manor on one simple standard: the written price you get is the price you pay. No door-step surprises. No “we found something else” upsells. Every AC Installation job starts with a load calculation, a fixed quote, and a set install date. You get the numbers upfront, and they don’t move.
Our techs know the subdivisions off FM 973, the acreage lots south of town toward Elgin, and the newer builds around the ShadowGlen area. We’re certified to service Carrier, Bryant, Daikin, and American Standard equipment, and we keep common parts stocked for fast turnaround on Manor jobs. When your AC goes down in July, “we’ll order that part” isn’t an answer you want to hear. We fix it faster because we’ve seen it before.
We answer the phone 24/7 with a real person. No voicemail tree. You call, a human picks up, and we get a technician headed your way with a live arrival time. That’s the Relay Standard, and it’s non-negotiable on every job we run in Manor.
Styles & brands we work with







Ductless Mini Split Installation in Manor
Ductless Mini Split Installation in Manor is the right move for a lot of situations where traditional ducted central air simply doesn’t make sense. That includes detached workshops, garage conversions, sunrooms, and older ranch homes on acreage that never had ductwork installed in the first place. A properly sized mini split runs $3,500 to $7,500 depending on the number of indoor heads and the tonnage required. The beauty is that each indoor unit operates independently, so you’re not paying to cool a workshop when nobody’s in it.
Workshops and Outbuildings on Acreage
Plenty of Manor properties east of 130 sit on one to five acres with a freestanding workshop, a barn, or a detached office. Running ductwork out to those structures usually costs more than the structure is worth. A ductless mini split solves that. But here’s the part most DIY installs get wrong: sizing. We regularly see compressors cycling on low refrigerant charge and failed capacitors because a homeowner bought a unit based on square footage alone, never accounting for exposed walls, uninsulated roofs, or the humidity load from a concrete slab. Our installs start with an actual load calculation, not a guess.
Room Additions and Garage Conversions
Manor’s growth means a lot of garage conversions and room additions on homes that were never designed to carry the extra heat load. Tapping into the existing duct system often leaves the new room sweltering while the rest of the house freezes. A ductless head in that space gives you a dedicated zone. You set the temperature for that room alone. It’s quieter than a window unit, more efficient than running the central system harder, and it qualifies for the same manufacturer rebates.
AC Replacement in Manor
AC Replacement in Manor is the most common installation we handle, and it’s almost always on a home that’s between eight and fifteen years old. The production builders put in code-minimum systems, and Manor’s summer heat doesn’t care about code minimums. A full replacement runs $3,500 to $7,500, and the difference in cost typically comes down to SEER2 efficiency rating, whether you’re going with a heat pump or straight AC, and any ductwork corrections the job requires. We give you the price in writing before work starts. It doesn’t change.
Builder-Grade Replacement Reality
Here’s what we see over and over in Manor subdivisions: a 2.5-ton unit on a house that actually needs 3 tons, a single-stage compressor that runs nonstop from June through September, and an evaporator coil that freezes because the ductwork is pinched in a vented attic. The original installer sized the system for a floor plan, not for a house facing west with no shade and a dark shingle roof. When we replace a system, we run a Manual J load calculation first. Sometimes the answer is less tonnage with better duct design. Sometimes it’s more. Either way, you get a system that actually matches the house, not a copy of what the builder put in.
Heat Pump Options for Manor Winters
Manor gets a real winter now and then. The 2021 freeze caught a lot of heat pump owners off guard because their units weren’t configured for cold-weather operation. A modern cold-climate heat pump with a SEER2 rating handles Manor’s typical winter conditions without backup strips kicking in until you’re below freezing for extended stretches. If you have propane available on rural property, a dual-fuel setup works well too. We’ll walk you through the tradeoffs in plain English and give you a fixed price for whichever route you choose.
Trusted Brands We Service in Manor
We install and service the equipment Manor homeowners actually have, including Carrier, Bryant, Daikin, and American Standard. When you call us for an AC installation in Manor, we don’t push you toward a single brand. We recommend the system that fits your house, your ductwork, and your budget. And because our techs carry common parts for these brands on the truck, a replacement capacitor or a control board swap doesn’t turn into a three-day wait while a part ships from Dallas. The brands we quote are the brands we stand behind, with manufacturer warranties registered for every Manor install.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Manor Homes
- Undersized tonnage from builder-grade installs. The same floor plan gets the same 2.5-ton unit whether the lot faces west or is shaded by a neighbor. On a 100°F Manor afternoon, an undersized system never satisfies the thermostat, runs continuously, and freezes the evaporator coil. A proper load calculation usually shows the house needs a half-ton more than what was installed.
- Ductwork baking in vented attics. Manor attics hit 130°F in August. Duct runs in that heat push static pressure higher than the blower is rated for, which strains the motor and cracks heat exchangers on furnace-equipped homes come winter. We rebalance supply plenums and add insulation where it’s actually needed, not just where it’s easy.
- DIY mini splits on rural outbuildings. A workshop gets a cheap single-zone unit sized by square footage guesswork. The compressor runs low on charge, the capacitor fails, and by year two the whole thing gets ripped out. We see this on acreage lots east of 130 constantly.
- Frozen heat pumps during winter freezes. Homes without freeze protection on the condensate line or a proper defrost cycle end up with a block of ice on the outdoor unit right when they need heat most. A correctly installed heat pump with a low-ambient kit handles Manor’s occasional hard freezes without drama.
Pricing for AC Installation in Manor, TX
Real numbers, in writing, before work starts. That’s how we quote every AC installation in Manor.
| Service | Price Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Replacement | $3,500 – $7,500 |
| Ductless Mini Split Installation | $3,500 – $7,500 |
The spread accounts for tonnage (1.5 to 5 tons), efficiency level (SEER2 rating), single-stage versus variable-speed, and whether we’re correcting ductwork or reusing the existing plenum. A basic 3-ton 14.3 SEER2 straight AC swap in a standard Manor tract home lands toward the lower end. A variable-speed heat pump with full duct corrections and a cold-weather kit lands higher. Either way, you get one written number. That number includes labor, materials, refrigerant, the thermostat, and the 365-Day Done Right Promise. No overtime charges, no surprise line items. Call (361) 202-9170 for a free estimate.
We Also Serve Cities Near Manor
Our crews run AC Installation in Manor and the surrounding area daily, so you’re never waiting on a technician who has to drive across the county. We also serve Pflugerville, Elgin, Austin, and Georgetown with the same written-price guarantee and live arrival tracking. Whether you’re off 973 or north of the river, the process is identical: call, get a live arrival time, see a fixed price before work starts.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Manor
Manor’s production-built subdivisions run the same HVAC design across entire neighborhoods, and that design assumes ideal conditions that Manor’s climate doesn’t provide. Vented attics bake ductwork at 130°F, west-facing walls with no shade push heat loads beyond what the builder installed, and code-minimum insulation forces systems to run far longer than expected. We regularly replace units in Manor that are three to five years old and already showing a restricted TXV or a blower motor running at high static pressure. The fix starts with a real load calculation, not another like-for-like swap. Call (361) 202-9170 and we’ll show you the numbers.
A ductless mini split is almost always the right answer, and in Manor that job runs $3,500 to $7,500 depending on square footage, insulation, and the number of indoor heads. No natural gas line means no furnace, and a heat-pump mini split handles both cooling and heating from a single system. The key is sizing it properly. An exposed workshop on a concrete slab with no tree cover needs a very different load calculation than a shaded garage. We run that calculation before we quote, so you’re not buying a compressor that’s going to fail on low charge in two seasons. Call (361) 202-9170 for a fixed quote on a workshop mini split.
A frozen evaporator coil on a two-year-old Manor home almost always means the installed tonnage is too small for the actual heat load, and the ductwork is pinched in a vented attic, spiking static pressure and reducing airflow across the coil. The original builder install matched the floor plan, not your specific house. We see this exact failure pattern in subdivisions across Manor, where the same 3-ton unit goes into the same house on the same block, and the same coil freezes on the same 100°F day. The fix is a proper Manual J load calculation and, usually, a half-ton upsize plus a supply plenum rebalance. Call (361) 202-9170 for a free assessment.
SEER2 is the newer efficiency testing standard that reflects real-world conditions more accurately than the older SEER rating, and yes, it matters in Manor because our summers push equipment to run near continuously. A SEER2-rated system is tested under higher static pressure and more realistic duct conditions, which means its efficiency numbers hold up better on a 100°F day in a tract home with a vented attic. Every AC installation in Manor we quote includes the SEER2 rating on the proposal, and we’ll explain in plain English how much electricity each option saves. Call (361) 202-9170 and we’ll walk you through the numbers for your specific house.
A modern cold-climate heat pump keeps a Manor house warm down into the teens and low twenties without backup heat strips, provided it’s sized correctly and has a low-ambient defrost strategy. The 2021 freeze knocked out a lot of heat pumps because they weren’t configured for cold-weather operation, not because heat pumps can’t handle Manor winters. On rural acreage with propane available, a dual-fuel setup gives you a gas furnace backup for the coldest nights. On a city lot, a cold-climate heat pump alone is usually sufficient. We’ll give you a fixed price for whichever option fits your property. Call (361) 202-9170 to talk it through.
Written by Andre Fuller, Owner at Halden Heating and Air Austin, providing AC installation in Manor with written pricing and the 365-Day Done Right Promise.