AC Installation in Austin - Load-Calculated, Priced in Writing

Fast, Reliable AC Installation Across Austin

AC installation in Austin typically runs $3,500 to $7,500 for a complete system, and in most Austin neighborhoods we can have a crew on-site within 24 to 48 hours of your estimate. The biggest variable isn’t the brand of equipment. It’s what we find when we open up your attic, check your ducts, and look at your electrical panel. If you’re in an older Austin home, those three things matter more than the SEER rating on the box. Call (361) 202-9170 and we’ll give you a written price before any work starts.

Call (361) 202-9170

We’ve retrofitted homes in Cherrywood, Hyde Park, Brentwood, and Allandale. We know what a 1960s ranch in East Austin hides behind its drywall. We know what July does to a system that was sized wrong from day one. This page walks you through what actually matters when you replace or install AC in Austin, and what it costs.

Why Halden Heating and Air Austin Is Austin’s Preferred AC Installation Company

We’re an independently owned and operated business founded in 2004, part of the Relay Home Co. network, and we run every Austin install under The Relay Visibility Guarantee. That means you book online, get a live arrival time, and track your tech to the door. No four-hour windows. No wondering if anyone’s actually coming.

Andre Fuller leads our Austin operation, and the standard he sets is simple: a written price lands in your hands before a single tool comes off the truck. Every job carries the 365-Day Done Right Promise. If it’s not done right, we make it right. That’s a full year of accountability, in writing, on every completed install. Our technicians are background-checked, uniformed, and certified to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment.

Austin homeowners call us because we answer the phone. A real person picks up 24 hours a day, seven days a week. When your AC dies in August, that’s not a perk. That’s the whole point.

Furnace Installation in Austin

Furnace installation in Austin is a different conversation than furnace work in, say, Minneapolis. Our winters are shorter, but the 2021 freeze showed every Austin homeowner exactly what happens when a heating system is undersized, unmaintained, or waiting on a part that won’t arrive for a week. Furnace installation in Austin runs $3,500 to $7,500, depending on fuel type, efficiency level, and what your ductwork can support.

Gas Furnace Replacement

Austin’s older homes often run an original gas furnace from the 1960s or 1970s, and in East Austin especially, some of those furnaces have asbestos-wrapped ducts that need abatement before any modern equipment goes in. We coordinate that work so you don’t have to piece together multiple contractors. The new furnace gets sized to your actual heat loss, not the tonnage of whatever was there before.

Heat Pump Furnace Systems

More Austin homeowners are shifting to heat pump systems that handle both heating and cooling. The advantage is efficiency and a single system doing two jobs. The catch in older homes is electrical capacity. A heat pump with electric strip backup pulls more current than a gas furnace, and homes with a 100-amp panel may need an upgrade before installation. That upgrade typically runs $150 to $650 and we’ll flag it during the estimate, not after.

HVAC Installation in Austin

HVAC installation in Austin means more than setting a new condenser outside and calling it a day. It means evaluating the whole system: ducts, airflow, refrigerant lines, electrical service, and how the rooms actually perform in late afternoon heat. A full HVAC installation in Austin runs $3,500 to $7,500, with the spread driven by equipment efficiency, duct replacement, and whether panel work is required.

Ductwork and Airflow Correction

The flex duct systems installed in 1970s and 1980s Austin homes were never great, and three decades of attic heat hasn’t improved them. Before we install new equipment, we run a static pressure test to see whether your ducts can actually deliver the airflow your new system needs. Skipping this step is the most common reason a new high-SEER2 system fails early and a homeowner ends up with rooms that still won’t cool.

Whole-System Replacement

When we replace the full system in an Austin home, we’re matching the condenser, evaporator coil, and blower to each other and to the load calculation for your specific house. A like-for-like swap of condenser only, keeping an old evaporator coil, creates a mismatch that cuts efficiency and shortens the life of the new equipment. We’d rather tell you that upfront than sell you a system that underperforms.

Trusted Brands We Service in Austin

Our Austin install crews work with Daikin, Bryant, American Standard, and Carrier equipment most often, and we stock common parts locally so a warranty repair or start-up issue doesn’t mean a two-week wait on a shipment. The right brand for your home depends on your budget, your efficiency goals, and what your existing ductwork can support. We’ll walk you through the trade-offs honestly. We don’t push one brand because we get a better margin on it.

Common AC Installation Problems We See in Austin Homes

• Original flex ducts choking the new system. A new high-SEER2 unit pushing air through collapsed or undersized ductwork is like putting a race engine in a car with a clogged exhaust. Airflow suffers, the blower works harder, and the motor fails early.
• Single-zone systems on unbalanced floor plans. Austin’s 1950s bungalows and 1970s ranches often have one thermostat and wildly different room temperatures. The back bedrooms can run 10 degrees hotter than the living room every August. A load calculation and zoning fix that before the equipment goes in.
• 100-amp electrical panels that can’t handle a modern condenser. Homes in East Austin and even parts of Crestview and Allandale still run original 100-amp service. The startup current on a new AC compressor can trip breakers or shut the whole system down. We check panel capacity during every estimate.
• Asbestos-wrapped ductwork in pre-1970 homes. Austin’s older East Side homes often have original 1960s gas furnaces with asbestos-wrapped ducts. That material has to be safely abated by a licensed contractor before any modern installation begins. It adds a step and a line item, but skipping it isn’t an option.

Pricing for AC Installation in Austin, TX

We Also Serve Cities Near Austin

Our Austin crews regularly handle AC Installation work in Pflugerville, Manor, Buda, and Georgetown. Drive times are short enough that we can offer the same written pricing and live arrival tracking throughout the metro area. If you’re in a neighboring community and want the same upfront approach, call us.

FAQs About AC Installation in Austin