Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Kyle
A new central air system in Kyle typically runs $3,500 to $7,500 installed, and Halden Heating and Air Austin books most Kyle installs within a few days of the first call. We serve every corner of Kyle, from Plum Creek to Waterleaf to the older streets north of Center Street. Andre Fuller leads our team, and we schedule around your life, not the other way around. Need a straight answer on cost or timing? Call (361) 202-9170 and a real person picks up.
Kyle’s summers punish undersized equipment. We know because we work here constantly. The difference between a system that limps through August and one that holds 74 degrees at 3 p.m. comes down to sizing, ductwork, and attic conditions. We check all three before we quote anything.
Why Halden Heating and Air Austin Is Kyle’s Preferred AC Installation Company
We are not a call center routing work to whoever answers. We are an independently owned and operated HVAC business founded in 2004, part of the Relay Home Co. network. When you book with us, you get a written price before any work starts. Not a verbal estimate. A line-item document. Every install carries the 365-Day Done Right Promise. If something is not done right, we make it right, in writing.
Kyle homeowners deal with specific problems: slab foundations, attic units in 140-degree spaces, and builder-grade equipment that fails early. Our technicians have seen all of it. We book online, send a background-checked technician with a live arrival time you can track, and we answer the phone 24/7. No four-hour windows. No “someone will call you back.”
We certify our techs on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means we do not badmouth a brand just because we prefer another. We match the equipment to your house and your ductwork, then stand behind the labor for a full year.
Styles & brands we work with
Central Air Conditioning Installation in Kyle
Central air conditioning installation in Kyle means replacing or adding a full split system: an outdoor condenser, an indoor evaporator coil, and the refrigerant lines connecting them. In Kyle’s housing stock, that almost always means working in an attic. Most Kyle homes built in the 2000s and 2010s have slab foundations and horizontal attic air handlers. We install the system correctly, commission it, and calibrate the thermostat before we leave.
A typical central AC install in Kyle runs $3,500 to $7,500 depending on system size, SEER2 rating, and whether the ductwork needs modification. A 2-ton unit in a small single-story costs less than a 5-ton system with new duct runs.
Attic Systems and Ventilation
In subdivisions like Plum Creek and Waterleaf, attics routinely hit 140°F in July. An unvented attic shortens the life of every component in the air handler. We check static pressure and add ventilation when the numbers tell us the new system will cook itself. This is not an upsell. It is the difference between a ten-year system and a five-year one.
Manual J Load Sizing
We size every Kyle install with a Manual J load calculation, not a “same size as before” guess. Many older Kyle homes have undersized returns and oversized condensers. Installing a higher-SEER unit on the same restrictive ducts creates high static pressure and kills blower motors. We measure first.
Furnace Installation in Kyle
Furnace installation in Kyle is common in older homes that still run gas heat and in newer homes where builders put in the cheapest 80% unit available. A furnace replacement in Kyle runs $3,500 to $7,500. The range depends on fuel type, efficiency tier, and whether we are reusing the existing flue or running new venting.
Some Kyle homes have no natural gas service. For those properties, we install propane furnaces or all-electric heat pump systems instead. The choice comes down to utility availability and what you want for operating cost.
Propane Conversions Without Natural Gas
If you live outside the Kyle city limits on a larger lot without gas service, a propane furnace conversion or a heat pump installation makes the most sense. We quote both options with real numbers so you can compare installed cost versus monthly operating cost. No pressure to pick one or the other.
Heat Pump Options for All-Electric Homes
Kyle’s winter cold snaps occasionally freeze heat pump coils, especially when the refrigerant charge is off or the defrost cycle was never calibrated properly after installation. We commission every heat pump in both cooling and heating modes before calling the job done. A properly set up heat pump handles Central Texas winters without gas backup.
Trusted Brands We Service in Kyle
We install and service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Kyle customers, we commonly recommend Bryant, Daikin, and Carrier for full system replacements. Bryant gives strong mid-tier value. Daikin offers excellent heat pump performance for all-electric homes. Carrier delivers proven reliability with solid parts availability across the Austin metro. We keep common capacitors, contactors, and control boards stocked on our trucks, so a post-install follow-up in Kyle is usually a single trip.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Kyle Homes
- Undersized ductwork in 1980s-90s homes. Older Kyle subdivisions have ducts sized for 8-SEER equipment. A new high-efficiency system needs more airflow. If we skip the duct retrofit, the blower motor fails early and the system never reaches rated efficiency.
- Capacitor and contactor failures in unvented attics. In Plum Creek and Waterleaf, we routinely replace capacitors on systems under five years old. The 140°F attic cooks the electronics. We check attic ventilation before we condemn anything.
- Frozen heat pump coils in winter without defrost calibration. All-electric Kyle homes have no gas furnace backup. When a cold front hits and the defrost cycle was never set correctly, the outdoor coil ices over and the system shuts down. We commission heat pumps in heating mode every time, no exceptions.
- Builder-grade condensers failing early in newer tract homes. Kyle’s rapid growth means a lot of homes got the cheapest possible Goodman or Coleman unit stuffed into a hot attic. By year five, those systems struggle. We replace them with properly sized equipment matched to the home’s actual load.
Pricing for AC Installation in Kyle, TX
| Service | Kyle Price Range |
|---|---|
| Central AC Installation | $3,500 – $7,500 |
| Furnace Installation | $3,500 – $7,500 |
The range covers equipment size, SEER2 rating, ductwork condition, and whether we are doing a straight swap or a full system with attic ventilation work. You will not get a door-step renegotiation. Our estimate is written, itemized, and locked before we start. Call (361) 202-9170 for a free estimate and exact pricing for your house.
We Also Serve Cities Near Kyle
Our AC Installation crews work throughout Hays County and the southern Austin metro. If you live in Buda, Lockhart, Austin, or Manor, we can schedule the same written-price, track-your-tech visit we offer in Kyle. Same standards. Same guarantee.
Serving Kyle, TX - Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Kyle
Capacitors fail early in Plum Creek because most HVAC systems there sit in unvented attics that reach 140°F during Kyle’s long summers. The heat degrades the capacitor’s internal dielectric material, and by year five many originals are dead. We check attic temperature and ventilation before replacing a capacitor so the next one does not fail the same way. Call (361) 202-9170 if your system is cycling oddly.
Most Kyle homes without natural gas do better with a properly sized heat pump, because winters here are mild and electricity rates are stable. A propane furnace makes sense if you already have a propane tank or strongly prefer gas heat. We quote both installed costs side by side and let you decide. Estimates are free.
Attic temperature directly affects how long your new system lasts. In Waterleaf, attics regularly hit 140°F in summer, which stresses the air handler, blower motor, and electrical components. We measure static pressure and add ventilation when needed before commissioning. A system installed in a properly vented attic runs years longer.
Exposed rural properties around Kyle lose more heat in winter and gain more heat in summer than sheltered suburban lots. The right size comes from a Manual J load calculation, not a rule of thumb. We factor in square footage, window orientation, insulation, and exposure. Undersizing means the system cannot keep up. Oversizing means humidity problems and short cycling. We measure first, then quote.
Yes. We install mini-split heat pump systems in detached garages, workshops, and outbuildings throughout Kyle. A mini-split puts cooling and heating exactly where you need it without running ducts. Pricing depends on the unit size and whether electrical work is required. Call (361) 202-9170 and we will give you a written number.
Written by Andre Fuller, Owner at Halden Heating and Air Austin, serving Kyle since 2004.